升降平台厂家分析继电器如何正确使用？

1、继电器应在阴凉、干燥处使用，继电器通常使用的交流电有380v、220v两种，要选择正确的接入电源。
Lift manufacturers introduce relay in cool, dry place for AC power relay Commonly used 380v, 220v two kinds to choose the right access to power.

2、软引出端的继电器，切勿往返弯折，并保证根部不受力，硬引出端的继电器，在安装时不可以弯折，防止玻璃绝缘子破裂而造成漏气，选择插座的时候也不可以过紧或者过松，这样都会影响继电器的使用，插座要保持清洁。
Lift manufacturer of relay terminals analysis software, not to bend back and forth, and to ensure that the roots from power, hard terminals of the relay, the installation can not be bent to prevent breakage of glass insulators and cause leakage, can not choose when the socket too tight or too loose, so that will affect the use of relays and sockets should be kept clean.

3、升降平台厂家谈到升降平台焊接过程中要防止温度过高，焊接温度过高容易导致升降平台的继电器的线圈与引出端脱焊，会影

响到簧片触点的性能，还会可能造成构件的开裂。
Speaking lifting platform lifts manufacturer welding process to prevent overheating, soldering temperature is too high and likely to lead to the coil of the relay terminals of sealing off the lifting platform, it will affect the performance reed contacts, but also may cause cracking member.

4、升降平台厂家提醒升降平台焊接完成后要进行清洗，防止焊接过程中产生有害物质影响到继电器的使用。
Lift lifting platform manufacturers to remind cleaning after soldering to prevent harmful substances affect the use of the relay welding process.