热门产品
关于我们
联系我们
在平等体积下，液压升降机液压设备能比电气设备发生更大的动力。在平等功率下，液压设备的体积和质量小，即其功率密度大，布局紧凑。
Under equal volume, hydraulic lift hydraulic equipment can be greater than the electrical power generating equipment. Under equal power, small volume and mass of hydraulic equipment, that is, its power density, compact layout.
升降机液压传动易于对液体压力、流量或活动方向进行调理或操控。尤其是在自动化较高的场合，整个传动设备能完成很杂乱的按次举措，也能便利的完成长途操控和自动化。液压设备任务比拟平稳。由于质量和惯性小、反响快，液压设备易于完成疾速起动、制动和频频的换向。
Hydraulic lift is easy on the liquid pressure, flow conditioning or activity direction or control. Especially in the case of high automation, the entire transmission equipment can be completed very messy Pay initiatives, but also to facilitate the completion of the long-distance control and automation. Hydraulic equipment task compared to stable. Since the mass and inertia of small, fast response, easy to complete hydraulic equipment fast starting, braking and frequent commutation.
液压升降机操控体系(不带手压泵的液压集成块)： 在运用时必须将回油阀旋钮按顺时针方向拧紧，把手动换向阀手柄拉到“中立”的方位，发动电机(或柴油机)使体系任务，然后把换向手柄拉到“起升”的方位，液压升降机起升，抵达所需高度时，在将换向手柄推到“中立”的方位，液压升降平台中止上升还要封闭电机，即可作业。下落时，松开回油阀(逆时针方向旋转)，液压升降机依托自重就可下落。
Hydraulic lift control system (hydraulic manifold without hand pump): You must return valve knob clockwise twist in the use of tight, pull the manual valve handle "neutral" position, start the motor (or diesel engine ) so that the system task, and then reversing lever pulled "lifting" position, hydraulic lifts lifting, upon arrival at the desired height, in the reversing lever pushed to the "neutral" position, hydraulic lifting platform also suspend rise closed motor, can work. When falling, loosen the oil return valve (counter-clockwise), relying on the weight of the hydraulic lift can fall.
电磁换向阀液压操控体系：首要按动电动机开关，油泵打油(注重，不要回转)次时油泵处于卸荷状况，按起动开关，电磁换向阀1DT任务，液压升降平台起升。抵达所需任务高度时，封闭起升开关，即可作业。按下落开关，电磁换向阀2DT任务，液压升降机依托自重下落到原始方位。
