升降货梯的轴承更换方法

升降货梯http://www.jntr168.com/是轴承最多的升降设备，它的上升和下降也是依靠这些轴承的运动来完成的，频繁的使用会加大轴承间的磨损，也会让设备老化，这个时候就需要更换轴承了。那么应该如何更换轴承呢？

首先要使用行车或者吊葫芦把平台吊装起来，再进行拆卸，并把平台移动到其它的地方。所更换到的轴承一定要与原装的相同，否则就容易安装不上。如果需要更换的轴承超过一半，则需要全部进行更换，如果发现一个轴承的磨损达到90%则必须进行更换。更换完成后，要立刻对设备进行检测和校验。发现不平行要进行调整。
The first to use the road or chain hoist lifting up the platform, and then demolished, and the platform is moved to other places. The replacement of the bearings must be the same as with the original, otherwise it is not easy to install on. If you need to replace more than half of the bearing, you need to replace all, if you find a bearing wear reaches 90% it must be replaced. After replacing the equipment to be immediately detected and verified. Find no parallel to be adjusted.

如果新更换的轴承磨损过快，要与厂家联系查找问题，找到磨损过大的原因。更换的时候全选择正规厂家的耐磨套，不要买一些较差的次品，不仅不能解决问题，还能造成更严重的伤害。更换完成要对设备进行全面的保养，并空载运行几次进行磨合再进行使用。　
If the new replacement excessive bearing wear, to contact the manufacturer to find the problem, find the cause of excessive wear. When replacing the entire selection of formal wear sleeve manufacturers, do not buy some of the less defective, not only can not solve the problem, but also cause more serious injuries. To complete the replacement of the equipment to conduct a comprehensive maintenance and running-load operation several times before use.

升降货梯：http://www.jntr168.com/