桅杆升降机如何清洁？

1、首先是内部的轨道轮、链条清洁，我们可以采用市面上通用的WD40喷洒适量的防锈剂，然后做升降运动往返10次，让WD40带着灰尘杂质桅杆到底部，为了环保考虑一定在底部做专门的接垃圾污染物的回收盘。
The first is an internal lift manufacturers analysis of rail wheels, chain cleaning, we can use a common market WD40 spray the right amount of rust, and then do the lifting movement back and forth 10 times to WD40 mast with dust and

impurities in the end part to protect the environment must be considered at the bottom of doing a special garbage pick contaminant recovery disk.

2、机器工作栏清洁：可选用专门的吸尘器进行清洁，每次工作完都要清洁一次，这样清洁的好处是防止  杂物掉入桅杆，使机器损坏。
Lift manufacturers introduce clean machine working bar: You can use a special vacuum cleaner to clean, finished work must be cleaned once each, so the benefits of clean to prevent debris falling into the mast, so that damage to the machine.

3、机器桅杆外面及底座清洁，可用干毛巾擦拭污垢，难以清洁的污垢选择一些中性的清洁剂辅助完成。
Speaking outside the factory lift mast and base machine clean, use a dry towel to wipe the dirt, it is difficult to clean the dirt choose some neutral detergent auxiliary complete.

4、提醒注意清洁轮子内的卡的如线、毛发之类的杂物，然后加适当的润滑油。
Lift manufacturers such as draw attention to cleaning card inside line wheels, debris like hair, then add the appropriate lubricant.