操作升降货梯的几点注意事项

1、工作平台上的操作人员应佩带安全带，在带电区域工作时，应将车体按规定进行接地，升降货梯登高作业应由工作负责人进行指挥，负责人应按照GB5082标准规定信号与升降货梯操作工进行联系。发出的信号必须清楚、准确。
1, the operator work platforms should wear seat belts when working in the charged area, the body should be grounded in accordance with regulations, cargo lift by climbing operations command responsible person, the responsible person shall be in accordance with GB5082 standard signal and lift freight elevator operator contact. Signals must be clear and accurate.

2、升降货梯一般应先起下臂，再起中臂，最后起上臂。在升降货梯回转操作过程中，必须在下臂起升一定高度后方可进行回转，回转应缓慢，同时注意剪臂及平台对各设备的距离是否满足安全需要。
2, general cargo lifter should be from the lower arm, renewed in the arm, and finally from the upper arm. In the process of turning operations cargo lifter must lower arm swing can be carried out from up to a certain height, the rotation should be slow, taking care to cut the distance between the arm and the platform of the device meets the safety requirements.

济南天锐升降机械有限公司是液压升降机、升降平台、导轨式升降货梯、剪叉式高空作业平台、导轨式升降机的专业生产、维修，受到广大用户的信赖，产品畅销全国各地。
Jinan days of sharp movements Machinery Co., Ltd. is a hydraulic lift, lifting platform, rail cargo lift, scissor aerial work platforms, rail lifts specializing in the production, maintenance, subject to the trust of customers, products sold throughout the country.